One week to build a single curve of orange Hot Wheels track would normally be a bit slow, but when you’re dealing with the new 25-metre steel halfpipe of Walt Disney Studios Park, this is certainly not bad going.
Looking sleeker and more playful than the slightly utilitarian structure of the Parachute Drop, RC Racer grew from purple/pink steel supports in the third week of February to its full orange height just last week.
Member mehdi5 on magicforum captured some great shots of the new ride being pieced together:
Whilst this weekend, Dlrpteam took to the park and assessed the impact for us:
Compared to the still very modest size of the Studios’ current floorspace, Toy Story Playland occupies quite a sizeable extension; this halfpipe positioned right at the back of the area up against the new curve in the repositioned Studio Tram Tour route. As such, it has a less dominating impact on the park at present.
Sitting between the other recent Toon Studio additions, the new attractions do appear to complete a very colourful palette of attractions — pink and orange for RC, green for Toy Soldiers, yellow and red for Cars and blue for Crush’s Coaster. But this attraction is what it is — a large steel halfpipe, similar to those produced for “regular” amusement parks by coaster manufacturer Intamin, with only minimal customisation above ground.
That customisation has actually yet to appear — if you thought the ribcage design of the track is a little strange, that’s because flat orange pieces will sit between those steel protrusions, to give the look of a flat Hot Wheels-style track. In fact, the 20-seater vehicle will really be running on this very Intamin-like triangular track hidden in the middle.
Heading around the park, the more slender track and distant placement of RC Racer gives it much less impact than the Parachute Drop. The wide base, where the covered station loading area will span the track, nevertheless plays a few perspective tricks, making the ride looks wide and expansive from Backlot (and particularly the raised entrance area of Rock ‘n’ Roller Coaster):
Yet rather more slim and subtle from Vine Street, which runs diagonally past The Twilight Zone Tower of Terror entrance:
From outside the main body of the park, Studio 1 completely blocks all visual intrusion from Toy Story Playland whilst in Front Lot. You’ve got to back up to the higher level of the main resort hub to catch a glimpse of the new attractions between Studios 1 and 3:
Finally, let’s climb the Disney Village parking structure to see how the two towering new rides slot into the wider park. Zoomed in, it’s still the plump tower of Toy Soldiers Parachute Drop which has the impact from this angle. Currently unlit, RC Racer has less presence all the way in the distance there:
And looking at the complete picture, the new land is completely dwarfed by Tower of Terror. As expected, the two attractions, both around 25 metres high, just about reach the top of the Tower’s front showbuilding, and no higher:
Nevertheless, the ride presents a dilemma for the morals of Disney Imagineering fans. On the one hand, it’s a steel halfpipe that now towers over much of the park. On the other, the clever Hot Wheels concept might well allow it to justify itself — at least far more easily than past WDI creations such as Mulholland Madness (California), Primeval Whirl (Florida) or even mini coasters like Flounder’s Flying Fish Coaster (Tokyo) and Gadget’s Go Coaster (Tokyo/California), all of which feature bare steel track and supports with little grace.
Photos by mehdi5, Dlrpteam.